RW-R750

Operating mode:

The activator transmits continuous low-frequency pulse signal actively (including the activator number in carrier data) . The matched low-frequency tag which maintains the low-frequency receiving function receives the activated signal from the activator. The low-frequency chip of the tag will analyze the activator number in real time and the RSSI field strength of the signal. Then MCU microcontroller is awakened and the analyzed information is transmitted into it. The onboard 2.4G RF chip transmits strong signal which contains tag ID, activator number and RSSI value of the low-frequency field strength.

Within its valid recognition range, 2.4G reader can receive 2.4G frequency band data package, analyze the tag ID, the activator number and RSSI value of the data package which will be uploaded to the PC immediately. It only requires the appointed position for installation and power supply for normal operation. There is no need to do the communication setting and adjusting.

Basic application:

It can determine where the tag passed (the physical location of the activator). If an activator is installed inside and outside of access control respectively, accurate entry and exit judgments can be made according to the order in which the tag is activated. The upper or lower floor can also be determined accurately in the same way.

Within the cover range of one activator or a multiple-activator network, precise location can be determined according to the real-time RSSI value uploaded by the tag, and the accuracy can reach up to 10 cm level.

Recognition range:

The activator has 4 antennas and the activation radius of each two orthogonal antennas is 3.5 meters. If the four antennas are arranged side by side, the maximum recognition band can reach to the length of 14 meters and a width of 7 meters. The recognition range can be extended to 1000 m² with the use of special antennas.

A multiple-activator network can cover a wider activation range. If necessary, the activation range can also be reduced by reducing the transmitter power of the activator or the reception sensitivity of the low-frequency tag. Minimum range can be reduced to a radius of 1 meter.

Recognition speed & capability:

Because the signal emitted by the activator can be continuous or pulsed, the operating mode of the onboard low-frequency chip on the tag can also be continuous or pulsed. Different recognition speed and capability can be achieved by adjusting the operating mode and parameters for different applications. A good performance balance is achieved between speed and power consumption.

Communication security:

The activator uses special communication protocol. The condition code of the head is required to be calibrated, which can effectively eliminate the mis-activation caused by various electromagnetic interference. Data accuracy and security is ensured in the communication process.

Reliability:

The product fully considers the application requirements of industrial environment such as lightning protection, waterproofing and shock protection. The production process strictly conforms to the ISO 9001 quality standard. Multi-level quality inspection is implemented to ensure good performance and quality of the products.

Product Parameter

750 low frequency activator

Recognition distance: 0 ~ 120 meters adjustable

Identification method: omnidirectional identification

Receiving sensitivity: -93dbm

Transmitting power: -20dbm ~+4dBm

Working frequency band: bluetooth BLE4.1 frequency band 2.401~ 2.481GHZ

Communication rate: bluetooth BLE4.1 1Mbps

RFID mode: 250Kbps

Communication mechanism: bluetooth broadcast channel, based on HDLC time division multiple access and synchronous communication mechanism

Anti-interference ability: channel isolation technology, multiple devices do not interfere with each other

Security: cryptographic computation and security authentication to prevent link detection

Anti-dismantle function: when the tamper line on the tag is removed, an alarm signal will be sent and the time information will be recorded.

Low power alarm: it will upload low power information, in order to change the battery in time

Power consumption standard: the working power is micro-watt, and standby power is 4uA

Battery monitoring: it can detect whether the battery is stolen

Motion detection: real-time detection of label motion status

Battery configuration: 2 CR2450 buttons battery capacity 550mA

Service life: 2~3 years

Packaging characteristics: ABS engineering plastics, environmental protection, health, beauty, high strength drop and vibration resistance.

Environmental features: working temperature - 30 ℃ ~ 70 ℃

Working humidity: < 95%

Reliability: strong toughness, waterproof and shockproof, not easy to fall off, comfortable to wear, elegant appearance, meet the requirements of industrial environment

Shape: rectangle

Method of installation: binding